One of those is hiding a small amount of rot.
Now I don't like the factory jacking points, never have - they are far too flexible.
I prefer to lift against something solid like the torsion beams.
So I decided to remove them and use some of Matt's discarded panels to fill the gaps.
Repair panel laid over and position marked
Cut on the lines!
Second line is where repair panel will fit to, panel is overlapped and "joggled" or stepped.
new panel in place, requires welding on underside, finishing and dressing back
What a difference a grind makes - after a little dressing with the flap disk
No comments:
Post a Comment